Sortof recycling

fused bags-4, originally uploaded by hairycarrot.

newspaper bag and grocery bag

I was intrigued by etsy's fused plastic bag tutorial, so I tried it for myself. Mine doesn't work the exact same way, but it's likely a difference in iron.

These are all made from 2-3 layers of bag, with the cut out words and letters (and handles) in between.

Here's how:

Setup. This is not a great kids activity. Irons are hot and plastic is toxic if you have a mishap.
Make sure you have good ventilation. If it smells bad when you do this, stop. If you can smell it, you can inhale it.

1. Cut the excess parts of your bags off. These are the seams and handles, plus any words you don't like. Cut open so you can lay them flat.

2. Layer 2-3 sheets of plastic flat on your ironing board. You should layer them between wax paper and/or copy paper. Test this to decide what works best with some scraps before you settle on the real thing.

3. Iron on the middle setting, whatever that may be. Press firmly and go quickly. Only about 5 seconds at first. Check to see if the bags have fused.

4. #2 plastic bags tend to shrink slightly when you fuse them together. Don't fuse a fresh piece of bag to a fused piece. This will result in different levels of tightening up, and the pieces will get holey. If you are using #4 plastic bags, they will shrink less. It is okay to mix them.

5. If the bags have fused to satisfaction, set on a hot pad and move to the next one. If more fusing is necessary, iron again quickly. Try only to iron on the parts that have not fused. The more you iron, the more the plastic shrinks.

6. The fused plastic can be sewn much like fabric.

For a completely fused piece without sewing - wrap the layers of plastic around something that they won't stick to. This can be a sheet of paper or wax paper, or a solid object wrapped in wax paper. Then you can iron the plastic together into a shape. Then no sewing is required.